The KUHN Krause 4835 in-line ripper is the ideal tool to fight soil compaction, one of the leading causes of yield reduction. With working depths of 8” to 16”, the 4835 provides aggressive soil fracturing, while retaining valuable crop residue on the field surface. This allows for greater root development and water infiltration into the soil, and effectively reduces runoff and soil erosion. KUHN Krause 4835 in-line rippers are available in folding 8-, 9- or 11-shank models. 8- shank spacing choices include 36”, 38” and 40”, while 9- and 11-shank folding models offer 30” spacing. The unique horizontal fold configuration makes transport and storage more convenient. The 4835 can be equipped with spring reset shanks or rigid, shear-bolt protected shanks for soils where rock is not a concern. A variety of points are available depending on your agronomic needs. |
| ||||||||||||||||||||||||||||||||||||||||||||||||
Gauge Wheels Ratchet-jack adjustable depth gauge wheels are standard equipment on the 4835. These 20.5” x 8” load range E tires, on 5-bolt hubs, maintain uniform depth in varying field surfaces and soil types. |
Coulters Heavy-duty, 22-inch diameter x ¼” thick coulters are standard on each row of all 4835 in-line rippers. These rugged coulters feature 450 pounds of down pressure to slice through the toughest crop residues. Coulter hubcaps are secured with metal retainers to ensure bearing protection. |
Closing Wheel Attachment Designed to further limit soil blowout, optional closing wheels operate independently of shank depth maintaining constant soil contact close to the shank. Closing wheels are easily adjustable for operating position in relation to the ripper shank and down pressure. |
3-Point or Pull-Type Configurations 3-Point Hitch Designed for deep tillage with strength and durability in mind. This Category IV, 3-point hitch is integrated into a two-bar frame design with main members of heavy-duty, 6”x6” structural steel tubing. |
Rear Lift Drawbar Pull-Hitch The optional drawbar pull-hitch lets you match tractors, not equipped with 3-point hitches, to the 4835 in-line ripper. The drawbar pull-hitch includes (4) 280/70 R15 tires on the rear lift and (2) 280/70 R15 front mounted gauge wheel tires. |
Shank Mounts to Match Your Field Conditions Shear-Bolt Rigid, shear-bolt mounts are an economical choice for soils where rocks or other obstacles are not a concern. Shear-bolt protection guards against shank damage from unexpected obstacles. // Shear force: 10,000 pounds (approximate) // 16” maximum shank working depth // For non-rock conditions
Spring Reset Recommended for field conditions where obstacles or rocks may be encountered. A 4”x4” welded tube provides strength. // 2,500 pound point load // 20” trip height // 16” maximum shank working depth // 36” underframe clearance
PathFind’R™ Exclusive pivoting design allows the shank to deflect up to 6 degrees on each side for a total of 12 degrees of movement. // Basic spring reset design // Makes deep ripping possible on contours or terraces // Deflects impacts improving performance in rocky soils // Smoother steering under full power with tracked tractors // Reduces stress on implement frame and 3-point tractor hitch // Not compatible with pull-type hitch // 20” trip height // 16” maximum shank working depth // 36” underframe clearance |
Shank & Point Options MRD Shanks, Points and Wings (Minimum Residue Disturbance) Choose from a variety of MRD shank points and wings to achieve optimum residue level and surface appearance. // 1-1/4” Profile // Austempered ductile, reversible wear bar // Welded chromium carbide side plates
2” Chromium Carbide Point 5” Shattering Wing // Residue remaining: 51% to 65% // Fracture: 36% to 52% Low-Disturbance Shank Cap // Residue remaining: 51% to 65% // Fracture: 31% to 48%
¾” Chromium Carbide Point 5” Shattering Wing // Residue remaining: 68% to 75% // Fracture: 36% to 52% Low-Disturbance Shank Cap // Residue remaining: 68% to 75% // Fracture: 31% to 48% |
Standard No-Till Shank, Points and Wings The no-till point and 8” wing break up the compacted soil layer, while the narrow ¾” shank slips through the soil leaving up to 86% residue on the surface. With replaceable wear parts, this no-till design offers lower operation cost versus competitors. // ¾” profile // High-tensile steel shank // Austempered or chromium carbide points, wings and wear bar // Chromium carbide side plates // Residue remaining: Up to 86% // Fracture: 55% to 70% // Replaceable wear parts // Optional 2" chromium carbide point with low-disturbance shank cap
2” Hard Surface Point // Best performance for rocky conditions // Residue remaining: 51% to 65% // Fracture: 31% to 48% |