Bush Hog® 2215 Flex-Wing Series Rotary Cutters

Bush Hog® 2215 Flex-Wing Series Rotary Cutters THE MEDIUM-PLUS DU...


Bush Hog® 2215 Flex-Wing Series Rotary Cutters

The Bush Hog® model 2215 Flex-Wing rotary cutter is designed to cut grass, weeds, and brush up to 3 1/2” in diameter. It is recommended for use in pasture maintenance, crop shredding, and roadside maintenance. With maintenance friendly features such as EZ clean decks, EZ lube drivelines and Bush Hog® tough durability, the 2215 is another Flex-Wing example of Bush Hog® Performance You Can Count On.


2215 Flex-Wing Series Rotary Cutters
Sale Type
Bush Hog
Manufacturer Qty


Models 2215
Cutting Width 15′
Cutting Height 2″ – 14″2″ – 14″
Cutting Capacity 3 1/2″
Transport Width* 8′ 2″
Transport Height** 7′ 3″
Transport Length*** 15′ 3″
Approximate Weight (lb.) 4,700
Approximate Tongue Weight (lb.) 1,800
Minimum Tractor PTO HP 60
Hitch “Perma-Level”
Center Deck 10ga
Wing Decks 10ga
Wing Cutting Angles 22° Down and 45° Up
Wing Level Adjustment Turnbuckles
Sidebands 1/4″ x 13 1/2″
Transfer Gearbox (HP) 250
Cutting Gearboxes (HP) 210
Input Driveline Category 6
Cutting Drivelines Category 4
Blade Holder 7ga Round
Blades 1/2″ x 4″
Blade Tip Speed (fpm) 16,286
Axle Suspension Springs @ Each Axle
Center & Wing Hydraulics 3 Hoses Standard
Safety Tow Chain Standard
Distribution Baffles Optional
PTO Driveline Support Optional

10-Year Gearbox Limited Warranty

1-Year Machine Limited Warranty



Performance Features

  • Wing skids are 3/8 inch thick for extended wear and outside edges are turned up at 45 degrees to stop heavy ground contact that might damage the sidebands.
  • Center section blades properly align with center wheels to closely cut out the bottom of ditches.
  • Grease fittings and spring steel bushings at axle pivot points for longer life.
  • Free wing float without movement of the hydraulic cylinder rod is 22 degrees down and 45 degrees up.
  • Optional grass/row crop baffles for improved distribution in grass and corn stalk shredding.

Construction Features

  • Center section axle spindles are centered on the axle arm for equalized loading of vertical forces.
  • Patent Pending oil sight gauge takes the guess work out of checking the oil. In less than 10 seconds, all three cutting box oil levels can be checked and rechecked.
  • All grease fittings on the PTO CV driveline and wing drivelines align for quick location of grease points, reducing service times.
  • Greaseable Axle Pivot Points with spring steel bushings
  • Turnbuckle alignment with wing hinge pin ensures long life of turnbuckle and less hinge wear.
  • Powder Coat Paint

Safety Features

  • Improved design of wing sidebands means less damage caused by sideband-to-ground contact.


  • 18805_BUSH-HOG_flex-wing-lit_WEB-VERSION.pdf